Subaru Legacy BN/BS (2015-2019) Service Manual: External connection terminal

Installation

1. DATA COMMUNICATION MODULECAUTION:After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.1. Install th ...

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the heater control assembly. Control Panel > REMOVAL3. Remove the cove ...

Other materials:

Data link connector note
This connector is used for Subaru Select Monitor.CAUTION:Do not connect any scan tools other than Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.Terminal No.ContentsTerminal No.Contents1Blank9Blank2Blank10Blank3Blank11Blank4Ground12Blank5Groun ...