Subaru Legacy BN/BS (2015-2019) Service Manual: Oil temperature sensor

Installation

1. INTAKE SIDE1. Install the intake oil flow control solenoid valve, and connect the connector to the intake oil flow control solenoid valve.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. C ...

Removal

1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Other materials:

Installation
1. Install the water pump to the oil pan upper, and tighten the bolts in the numerical order as shown in the figure.NOTE:Use a new gasket.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Install the timing chain assembly. Timing Chain Assembly > INSTALLATION3. Install the chain cover. Cha ...