Subaru Legacy BN/BS (2015-2019) Service Manual: Egr cooler

Installation

1. Install the EGR pipe adapter to the EGR control valve.NOTE:Use a new gasket.Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)2. Install the EGR control valve to the intake manifold assembly, ...

Removal

1. Fully open the front hood. NOTE2. Remove the V-belt covers.3. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.4. Remove the air intake boot from the air cleaner ...

Other materials:

Dtc b16b8 short in side satellite sensor bus lh (to +b)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Shorted between side sensor LH circuit and power supply circuitWIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Airbag system Airbag System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK PO ...