Subaru Legacy BN/BS (2015-2019) Service Manual: Keyless entry control module

Installation

CAUTION:Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).1. Install the keyless buzzer.2. Connect the ground terminal to battery senso ...

Removal

1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel assembly - rear shelf. Rear Shelf Trim > REMOVAL3. Remove the keyless entry control module.(1) Disco ...

Other materials:

Installation
1. Install the intake manifold onto cylinder heads.NOTE:Use a new gasket.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)• RH side• LH side2. Install the bolts securing the EGR pipe B to the EGR control valve.NOTE:Use a new gasket.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 f ...